In Stock

ELM327 OBDII WiFi Wireless Diagnostic Scanner For Apple IPhone Touch

Item No.OA166
Already sold: 3 items
$29.99

Now Price: $29.99

Quantity :

  • Weight :
  • 0.3KG
  • Shipping:
    Shipping cost based on your country.   Express Shipping Service 
    Estimated delivery time: 3-5 Days.See details >>
    Returns:
    Return for refund within 7 days,buyer pays return shipping.Read details >>

    Other items you might be interested in

    • Item Description
    • Related Download
    • Product's Reviews (0)
    • Write a Review
    ELM327 OBDII WiFi Wireless Diagnostic Scanner For Apple IPhone Touch


    Description:

    Wifi ELM327 interface is able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches. It includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.

    With proper software installed in the host device, you may have following parameters read out from your vehicle:

    Vehicle Speed
    RPM
    Fuel Consumption*
    Engine Coolant Temp
    Fuel Pressure
    Calculated Engine Load
    Throttle Position
    Intake Manifold Pressure
    Air Intake Temp
    Timing Advance
    Mass Air Flow
    Fuel Level
    Barometric Pressure
    EVAP System Vapor Pressure
    Fuel Trim
    Note:
    Your vehicle may not support all above parameters.How many parameters you can get is depended on the vehicle manufacturer’s implementation.


    Wireless ELM327 Multi-Protocol Support:

    SAE J1850 PWM (41.6 kbaud)
    SAE J1850 VPW (10.4 kbaud)
    ISO 9141-2 (5 baud init, 10.4 kbaud)
    ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
    ISO 14230-4 KWP (fast init, 10.4 kbaud)
    ISO 15765-4 CAN (11 bit ID, 500 kbaud)
    ISO 15765-4 CAN (29 bit ID, 500 kbaud)
    ISO 15765-4 CAN (11 bit ID, 250 kbaud)
    ISO 15765-4 CAN (29 bit ID, 250 kbaud)
    SAE J1939

    ELM327 Scanner Vehicle Coverage:

    Work with all models that support the OBD2 standard ( Acura, Alfa Romeo, Ariel Atom, Aston Martin, Audi, Bentley, BMW, Buick, Cadillac, Chevrolet ,Chrysler, Citroen, Daewoo, Daihatsu, Daimler, Dodge, Ferrari, Fiat, Ford, Geo, GMC Holden, Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Lamborghini, Lancia Land Rover, Lexus,Lincoln, Lotus, Maserati, Mazda, McLaren, Mercedes, Mercury, MG, Mini Mitsubishi, Nissan, Oldsmobile, Opel, Pagani, Panoz, Peugeot, Plymouth, Pontiac, Porsche Regal, Renault, Rolls Royce, Roush, Rover, Saab, Saleen, Saturn, Seat, Scion, Shelby Skoda, Smart, Subaru, Suzuki, Tesla, Toyota, Triumph, TVR, Vauxhall, Volkswagen, Volvo, Yugo etc...).
    For your information:
    For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
    All vehicles from 1996 in USA and Petrol cars from 2001,diesel cars from 2003/2004 in Europe are obd2 compliant.

    OBD II ELM327 Hardware Requirements:

    PC/iPhone/iPod/iPod Touch/iPad
    Important: Your PC requires wireless LAN router supporting WiFi 802.11 a/b/g for linking.

    ELM327 Software Requirements:

    - All ELM327 based software
    - iOS base software in Apple store: Rev / FUZZYCar / DashCmd / SpeedPORT / Nova Scan
    Attention: iOS base software are not included you must buy from Apple App Store! we only offer PC version software &  Instructions manual (on the CD)

    Wifi ELM327 Technical Specifications:

    SSID: WiFiOBD
    IP: 192.168.0.10
    Subnet: 255.255.255.0
    Port: 35000
    Range: 50 ft (Line of sight)
    Antenna: Internal
    Power Consumption: 0.75 Watts
    Wifi Standard: 802.11a/b/g
    Operating Temperature: -15 to 100 Deg Celsius

    WIFI ELM327 FAQs:

    Q: Does the elm 327 SC133-B also work on windows xp 32 bit?
    A: Yes, it can work on computers or laptops, but it should have wifi on these computers.

    WIFI ELM327 Package contents

    1 x Wifi ELM327 obd interface
    1 x Software CD

    Contact Us:

    This product was added to our catalog on Sunday 05 May, 2013.


    Write a Review

    Rated 0/5 based on 0 customer reviews
    Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
    Validation Code
    luerb
    * (case insensitive)

    NOTE: HTML tags are not allowed.
    NOTE: Reviews require prior approval before they will be displayed