Other items you might be interested in
- Item Description
- Related Download
- Product's Reviews (0)
- Write a Review
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:Volkswagen/Skoda/Audi/Seat
Read & erase error code,log data e. g. speed, gasoline, consume engine-rotating (RPM: Rotation Per Minutes).
1.This cable can not work if your car uses a protocol/ bussystem like VPW,PWM or Can-bus.2.Terminal Bus of communication3.Terminal L=Ignition for waking up car computing system (ECU: Engine Control Unit)4.Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW5.This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only6.Supported also ISO9141 protocol7.The cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.8. Product running as virtual comport, like many products it use a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.
1 x VAG COM 409.1 Cable1 x Driver CD
This product was added to our catalog on Wednesday 02 May, 2012.
Write a Review
Rated 0/5 based on 0 customer reviews